Products

  • Anti-Corrosive 4-20mA Output Single Flange Installation Flat Diaphragm Type Pressure Transmitter

    Anti-Corrosive 4-20mA Output Single Flange Installation Flat Diaphragm Type Pressure Transmitter

    PCM401 Flush Pressure Transmitter with Flange is a type of flush product in order to meet the flange mounting requirement of the customer. This product adopts the imported diffuse silicon pressure sensitive element, and after the long-term aging and stability selecting, the product performance is stable and reliable.

    PCM401 Flush Pressure Transmitter with Flange takes the international standard flange plate as the connection standard, and can realize the on-site flange mounting mode for the user. Because the stress diaphragm is exposed and senses the pressure directly, convenient for cleaning, and able to meet the moistureproof, waterproof, ex-proof and other severe working condition requirements, the products of this series are widely applied for the viscous media with particles in the fields such as industrial process control, petroleum, chemical industry, metallurgy etc.
  • KH702R/U RS485 Communication Converter

    KH702R/U RS485 Communication Converter

    RS232/RS485  isolated communication module

    1000V inner isolated voltage, DC TO DC

    MODBUS-RTU protocol

    0.5s sampling rate

    CE,ROHS,ISO etc

  • ABB SPA RS485 serial converter SPA100,REX521,SPA150C

    ABB SPA RS485 serial converter SPA100,REX521,SPA150C

    ABB SPA RS485 converter,interface converter,serial converter

     

    A communication interface converter is mainly used in ABB equipment, which converts SPA BUS signal into RS485 standard signal, with DB9/DB9 connection at the two ends. Applicable to ABB products as follows: SPAJ140 C, SPAJ141C, SPAJ142C, SPAD144C, SPAJ160C, SPAM150C, SPAC317C, SPAD346C, SPAU300C, SPAS120C, SPAU110C, SPAU121C, SPAU130C, REF54X, RET54X

    A. Support RS485 half-duplex mode.

    B. You can guarantee the long-distance transmission, though there is no need external power supply.

    C. Zero delay automatic conversion the RS485 signal to send and receive direction.

    D. No need to amend the original software you can also extend the SPA BUS communication distance to 1000 meters.

    E. Support multi machine communication, it can connect up to 128 nodes.

    F.performance parameters

    1. Power: no need external power supply

    2. Communication: half-duplex

    3. Transmission Line: Twisted Pair

    4. Communication distance: 1000 meters

    5. Communication rate: 110bps to 115200bps

    6. Connected nodes: 128

    G. Dimensions: DB9/DB9 adapter box 53×33×17mm; conversion wiring jiont 73×33×17 mm.

  • High Accuracy Pressure Sensor Digital Display LCD Temperature Pressure Transmitter

    High Accuracy Pressure Sensor Digital Display LCD Temperature Pressure Transmitter

    Products Description
    PCM-250 flush diaphragm pressure transmitter is a kind of solid flattened diaphragm with special treatment at the measuring terminal,hard particles in the measured medium will not damage the isolated flattened diaphragm. Compact structure, corrosion resistance,vibration resistance, corpuscle impact resistance, wide range temperature compensation. It is especially suitable for the measurement of fluid pressure of high viscous substances or with particulates. It solves the problem of medium blockage in the pressure tapping hole. 520 series low range LED on-site display pressure transmitter adopts the advanced electronic ceramic technology in the world to measure the dielectric-free liquid in the components. The 530 medium and high temperature pressure transmitter is assembled with imported high temperature resistant sensitive elements. transducer probe can work stably for a long time at 150℃. All three products both have the characteristics of overload resistance, strong impact resistance, good linearity, long-term stability, wide temperature range and corrosion resistance. Used in hydraulic, military, scientific research, aerospace, petroleum, chemical industry, electric power, ocean and other fields.

    Range
    -100~0~5,100,500,800,1000KPa;0~2,10~40MPa
    Pressure type
    Gauge pressure, negative pressure and absolute
    Output signal
    4~20mA, 0.5~4.5V
    Input voltage
    12~36V DC (5V)
    Accuracy
    0.1
    0.2(0.25)
    0.5
    Nonlinear Repeatability
    Delaying
    0.1
    0.2(0.25)
    0.5
    Zero and sensitivity
    0.01
    0.02(0.025)
    0.005
    Temperature
    -10℃~+70℃
    Work temperature
    -40~+150℃
    Long-term
    ≤0.1±%FS/year
    Response time
    <1ms
    Overload capacity
    200%
    Measurement medium
    Corrosive media compatible with 316L
    Diaphragm
    316L stainless steel, heusler alloy C-276
    Case material
    1Cr18Ni9Ti
    Protection rating
    IP67

    Device real-time monitoring query

    The equipment uses RS485 communication connection acquisition card to achieve real-time
    recording, monitoring and query
  • temperature sensor waterproof room oil pt 100 thermocouple k-type exhaust small temperature sensor

    temperature sensor waterproof room oil pt 100 thermocouple k-type exhaust small temperature sensor

    K Type thermocouple with metal sheath or lead cable is widely used in aviation, nuclear, petroleum, chemical, metallurgical, mechanical,electrical and other industrial sectors and scientific fields; K type is usually used with indicator, recorder, controller, and computer and other devices. K type can direct measure a variety of liquid, steam& gas and solid surface temperature from 0℃ to 1300℃. Especially suitable to be installed in special miniaturized temperature place with narrow pipeline, bending and rapid response required.

  • Plug in temperature transmitter output 4-20mA

    Plug in temperature transmitter output 4-20mA

     temperature transmitter

    KH series temperature transmitter module iswith 24V power supply, two-wire system of integrated transmitter. Products adopts imported integrated circuits, the thermal resistance or thermocouple signal amplification and conversion into 4-20mA or 0-10mA output current, or 0 ~ 5V output voltage. One armored transmitter can directly measure the gas or liquid temperature is particularly suitable for low temperature range measurement, to overcome the condensation of water on the impact of temperature measurement.
  • Male and female omega standard K type thermocouple connector

    Male and female omega standard K type thermocouple connector

    thermocouple connector with metal sheath or lead cable is widely used in aviation, nuclear, petroleum,chemical,metallurgical,mechanical,electrical and other industrial sectors and scientific fields; K type is usually used with indicator, recorder,controller, and computer and other devices. K type can direct measure a variety of liquid, steam& gas and solid surface temperature from 0℃ to 1300℃. Especially suitable to be installed in special miniaturized temperature place with narrow pipeline,bending and rapid response required

  • thermocouple types – Patch type

    thermocouple types – Patch type

    Type K thermocouple /PT100 temperature sensor is a temperature sensor using platinum (PT) resistance and temperature has a certain functional relationship, because of its high precision, large measurement range, reproducibility and stability. Can directly measure the surface temperature of various liquids, vapors, gases and solids. Especially suitable for installation in special miniaturized temperature places, pipe narrow, bending, fast response requirements.
    Temperature sensor specifications:
    1. The temperature range of use:
    K (- 50 ~ 1300 ° C), S (50 ~ 1700 ° C), T (200 ~ 350 ° C),E (0 ~ 800 ° C), J (0 ~ 1000 ° C), B (300 ~ 1800 ° C), N (0 ~ 1300 ° C)
    PT100: -200 to 500℃ for Class A, -200 to 600℃ for Class B Cu50 ( -50 ~ 150℃ ) , Cu100 ( -50 ~ 150℃ )
    2. Use the 2/3-wire interface
    3. Accuracy from Class I, Class II
    Features:
    1. High precision and good stability;
    2. High sensitivity and good linearity;
    3. Short response time and good compatibility;
    4. Compact structure, easy installation, good waterproof performance

  • thermocouple types – pressure ring type

    thermocouple types – pressure ring type

    Type K thermocouple /PT100 temperature sensor is a temperature sensor using platinum (PT) resistance and temperature has a certain functional relationship, because of its high precision, large measurement range, reproducibility and stability. Can directly measure the surface temperature of various liquids, vapors, gases and solids. Especially suitable for installation in special miniaturized temperature places, pipe narrow, bending, fast response requirements.
    Temperature sensor specifications:
    1. The temperature range of use:
    K (- 50 ~ 1300 ° C), S (50 ~ 1700 ° C), T (200 ~ 350 ° C),E (0 ~ 800 ° C), J (0 ~ 1000 ° C), B (300 ~ 1800 ° C), N (0 ~ 1300 ° C)
    PT100: -200 to 500℃ for Class A, -200 to 600℃ for Class B Cu50 ( -50 ~ 150℃ ) , Cu100 ( -50 ~ 150℃ )
    2. Use the 2/3-wire interface
    3. Accuracy from Class I, Class II
    Features:
    1. High precision and good stability;
    2. High sensitivity and good linearity;
    3. Short response time and good compatibility;
    4. Compact structure, easy installation, good waterproof performance

  • S type thermocouple

    S type thermocouple

    S type thermocouple has the advantages of high accuracy, best stability, temperature measurement to wide, long service life, physical and chemical properties, thermoelectric potential stability and good oxidation resistance at high temperature, suitable for oxidation and inert gas.
    Temperature sensor specifications:
    1. The temperature range of use:
    K (- 50 ~ 1300 ° C), S (50 ~ 1700 ° C), T (200 ~ 350 ° C),E (0 ~ 800 ° C), J (0 ~ 1000 ° C), B (300 ~ 1800 ° C), N (0 ~ 1300 ° C)
    PT100: -200 to 500℃ for Class A, -200 to 600℃ for Class B Cu50 ( -50 ~ 150℃ ) , Cu100 ( -50 ~ 150℃ )
    2. Use the 2/3-wire interface
    3. Accuracy from Class I, Class II
    Features:
    1. High precision and good stability;
    2. High sensitivity and good linearity;
    3. Short response time and good compatibility;
    4. Compact structure, easy installation, good waterproof performance

  • k type thermocouple

    k type thermocouple

    k type thermocouple is a temperature sensor using platinum (PT) resistance and temperature has a certain functional relationship, because of its high precision, large measurement range, reproducibility and stability. Can directly measure the surface temperature of various liquids, vapors, gases and solids. Especially suitable for installation in special miniaturized temperature places, pipe narrow, bending, fast response requirements.
    Temperature sensor specifications:
    1. The temperature range of use:
    K (- 50 ~ 1300 ° C), S (50 ~ 1700 ° C), T (200 ~ 350 ° C),E (0 ~ 800 ° C), J (0 ~ 1000 ° C), B (300 ~ 1800 ° C), N (0 ~ 1300 ° C)
    PT100: -200 to 500℃ for Class A, -200 to 600℃ for Class B Cu50 ( -50 ~ 150℃ ) , Cu100 ( -50 ~ 150℃ )
    2. Use the 2/3-wire interface
    3. Accuracy from Class I, Class II
    Features:
    1. High precision and good stability;
    2. High sensitivity and good linearity;
    3. Short response time and good compatibility;
    4. Compact structure, easy installation, good waterproof performance

  • Intelligent Thermocouple transmitter

    Intelligent Thermocouple transmitter

    Temperature transmitter module is suitable for up to ten kinds of various thermocouple and thermal resistance signal transmission, the product is suitable for 24 ∑-△ analog front end, to ensure the measurement accuracy, perfect anti-surge, anti-reverse connection. USB communication line can be used for configuration Settings, without external power supply
    Features:
    1. High precision and good stability;
    2. High sensitivity and good linearity;
    3. Short response time and good compatibility;
    4. Compact structure, easy installation, good waterproof performance

123456 Next > >> Page 1 / 6